120 Volt Micro-Max Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS
This fixture is equipped with a polarized attachment plug (a plug having one blade wider than the other). This plug will fit in a polarized outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, reverse the plug. If it still will not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat the safety purpose of the polarized plug. CAUTION - To prevent electrical shock do not use this (POLARIZED) plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

MOUNTING INSTRUCTIONS

  1. REMOVE 4 PHILLIP-HEAD SCREWS, SECURING FRONT HOUSING TO BACK PLATE.

  2. PLACE BACK PLATE AGAINST UNDER CABINET SURFACE OR WALL AND MARK THE AREAS WHERE SCREWS ARE TO BE INSERTED.

  3. SECURE SCREWS HALFWAY INTO SURFACE, ON MARKED AREAS FROM STEP 2.

  4. SLIDE THE BACK PLATE OVER THE WOOD SCREWS, AND SLIDE UNTIL WOOD SCREW ARE IN NARROWEST PART OF KEY HOLES.

  5. SECURE WOOD SCREWS TO BACK PLATE, BY TIGHTENING INTO SURFACE.

  6. REPLACE AND SECURE FRONT HOUSING TO BACK PLATE WITH THE 4 PHILLIPS SCREWS.

  7. PLUG INTO CONVENIENCE OUTLET.

Line.gif (230 bytes)

Micro-Max Inst.gif (8061 bytes)

Micro-Max & Dmmr.gif (6462 bytes)

Micro-Max Blb Rplcmnt.gif (5924 bytes)

 

Hampton Bay Instructions for 120 Volt 2Lt & 3Lt Micro-Max
2Lt Micro-Max Instrcns.JPG (56662 bytes)

3Lt Micro-Max Instrcns.JPG (60609 bytes)

120V Micro-Max Instrcn-1.JPG (222543 bytes)
120V Micro-Max Instrcn-2.JPG (225233 bytes)
120V Micro-Max Instrcn-3.JPG (45852 bytes)
120V Micro-Max Instrcn-4.JPG (47863 bytes)
120V Micro-Max Instrcn-5.JPG (131919 bytes)
Hampton Bay Warranty.JPG (153313 bytes)
Hamptn Bay Slug.gif (4476 bytes)

WB01337_.gif (904 bytes)
BACK

WB01338_.gif (869 bytes)
HOME
 
Copyright © 2000 CompanyLongName